Petroleum Coke manufactured by delayed coking of residues obtained from crude oil distillation units of oil refineries is called Green or Raw Petroleum Coke.
| | Carbon % | Sulphur % | Ash % | VM % |
| CPC | 90 | 1.50 | 7 | 3 |
| Size | 10 to 100mm / As per Customer’s Requirement |
| Packing | Customizable as per customer’s requirement |
Calcined Petroleum Coke is extensively used for melting purpose of Alumina in Aluminium industry, as a carbon raiser while making Special High Carbon Steel in Foundries, as a conductive backfill in ground Electrode station and in manufacture of various Carbon and Graphite Products.
| | Carbon % | Sulphur % | Ash % | VM % |
| CPC | 99 * | 1.50 | 0.5 | 0.5 |
| CPC – Low Sulphur | 99 | 0.80 | 0.5 | 0.5 |
| Size | 1 to Smm / 5 to 25mm / As per Customer’s Requirement |
| Packing | Customizable as per customer’s requirement |
Graphite is suitable for all Induction furnaces and is used for increasing carbon in Molten Metal while keeping control on sulphur levels. This product is highly recommended for Ductile Iron and SG Iron manufacturers.
| | Carbon % | Sulphur % | Ash % |
| Graphite | 99 | 0.05 | 0.5 |
| Graphite – Extra low Sulphur | 99 | 0.03 | 0.5 |
| Size | | 0 to1 mm / 0.2 to 1 mm / 1 to Smm/ As per Customer’s Requirement |
|
| Packing | Customizable as per customer’s requirement |
Carbon booster in the registered trade mark of Alloysmin. Carbon boosters are suitable for all Induction furnaces and is used for increasing carbon in Molten Metal.
| | Carbon % | Sulphur % | Ash % |
| AIPL 90 | 90 | 0.2 | 7.5 |
| AIPL 93 | 93 | 0.15 | 6 |
| AIPL 95 | 95 | 0.1 | 4 |
| Size | 0 to1 mm / 0.2 to 1 mm / 1 to Smm/ As pe
Customer’s Requirement |
| Packing | Customizable as per customer’s |
Graphite electrode is used for the recycling of steel in the electric arc furnace industry. Its main ingredient is high-value needle coke which is made from either petroleum or coal tar. Graphite electrodes are finished with a cylinder shape and machined with threaded areas at each end. In this way, the graphite electrodes can be assembled into an electrode column using electrode nipple.
| Size | 8 inch / 10 inch/ 14 inch and 16 inch |
| Packing | | Customizable as per customer’s requirement |
|
Graphite stopper heads are used for controlling outflow of Molten Metal through the nozzle of bottom pouring ladles.
| | Carbon % | | |
| | 99 | | |
| Size | RS 23/ RS 24/ RS 130 and Z3 |
| Packing | 2 pc per Box |
